Brother DCP-110C User Guide

3 - 14 WALK-UP PHOTOCAPTURE CENTER
™
Borderless
This feature expands the printable area to fit the edges of the paper.
Printing time will be slightly slower.
1
Press
Menu
.
2
Press or to select
2.PhotoCapture
.
Press
Set
.
3
Press or to select
7.Borderless
.
Press
Set
.
4
Press or to select
Off
(or
On
).
Press
Set
.
5
Press
Stop/Exit
.
Understanding the Error Messages
Once you are familiar with the types of errors that can occur while
you’re using the PhotoCapture Center
™
, you can easily identify and
troubleshoot any difficulties.
When an error message appears on the LCD, the DCP will beep to
get your attention.
Media Error
—
This message will appear if you insert a media card
that is either bad or not formatted, or when there is a problem with
the media drive. To clear this error, take out the media card.
No File
—
This message will appear if you try to access a media
card in the drive (slot) that does not contain a .JPG file.
Out of Memory
—
This message will appear if you are working with
images that are too large for the DCP’s memory.
Downloaded from ManualsPrinter.com Manuals

Brother DCP-110C Specifications

General

Brand	Brother
Model	DCP-110C
Category	All in One Printer
Language	English