Brother DCP-110C User Guide

1 - 4 INTRODUCTION
Status LED indications
The status LED (Light Emitting Diode) is a light that shows the DCP
status.
LED DCP status Description
Off
Ready The DCP is ready for use.
Red
Cover open The cover is open. Close the cover. (See Error
messages
on page 5-1.)
Ink empty Replace the Ink cartridge with a new one. (See
Replacing the ink cartridges on page 5-20.)
Paper error Put paper in the tray or clear the paper jam.
Check the LCD message. (See Troubleshooting
and routine maintenance on page 5-1.)
Out of memory Memory is full. (See Error messages on page
5-1.)
Others Check the LCD message. (See
Troubleshooting
and routine maintenance on page 5-1.)
Downloaded from ManualsPrinter.com Manuals

Brother DCP-110C Specifications

General

Brand	Brother
Model	DCP-110C
Category	All in One Printer
Language	English