Brother DCP-110C User Guide

3 - 4 WALK-UP PHOTOCAPTURE CENTER
™
The steps below give a brief outline of the Direct Printing
feature. Please see the remaining pages of this chapter for more
detailed instructions.
1
Insert the media card firmly into the media drive (slot).
When you insert your media card
into the proper slot, the LCD shows:
2
Press
PhotoCapture
.
If your digital camera supports DPOF printing, see DPOF
printing on page 3-8.
3
Print the index that shows thumbnail views of the photos stored
on your media card. Your DCP will assign an image number to
each thumbnail.
Press or to select
Print Index
and then press
Set
.
Press
Colour Start
to start printing index sheet.
(See Printing the Index (Thumbnails) on page 3-5.)
4
To print the images, press or to select
Print Images
and then press
Set
.
Enter image number and press
Set
.
Press
Colour Start
to start printing.
(See
Printing images
on page 3-6.)
The media active message will be shown for 60 seconds and
then disappear. Even in that case, you can enter the
PhotoCapture mode by pressing
PhotoCapture
.
You can change the settings for printing images, such as the
Paper Type & Paper Size, Print Size and Number of Copies.
(See
Printing images
on page 3-6
.)
C.Flash Active
Press PhotoCapture key...
Downloaded from ManualsPrinter.com Manuals

Brother DCP-110C Specifications

General

Brand	Brother
Model	DCP-110C
Category	All in One Printer
Language	English