Loading documents and paper
17
2
Loading documents 2
You can make copies and scan from the ADF
(automatic document feeder) (DCP-185C
only) and from the scanner glass.
Using the ADF
(DCP-185C only) 2
The ADF can hold up to 15 pages and feeds
each sheet individually. Use standard
80 g/m
2
paper and always fan the pages
before putting them in the ADF.
Recommended environment 2
Document Sizes Supported 2
How to load documents 2
CAUTION
DO NOT pull on the document while it is
feeding.
DO NOT use paper that is curled, wrinkled,
folded, ripped, stapled, paper clipped,
pasted or taped.
DO NOT use cardboard, newspaper or
fabric.
Make sure documents written with ink are
completely dry.
a Unfold the ADF Document Output
Support Flap (1).
b Fan the pages well. Make sure you put
the documents face down, top edge
first in the ADF until you feel them touch
the feed roller.
c Adjust the paper guides (2) to fit the
width of your documents.
CAUTION
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
Temperature: 20 to 30° C
Humidity: 50% to 70%
Paper:
80 g/m
2
Length: 148 to 355.6 mm
Width: 148 to 215.9 mm
Weight:
64 to 90 g/m
2
1
2
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
