Brother DCP-7057R User Manual

80 pages

To Next Page

NETWORK

USER’S GUIDE

Multi-Protocol On-board Ethernet Multi-function Print Server and

Wireless Ethernet Multi-function Print Server

This Network User’s Guide provides useful information of wired

and wireless network settings, security settings and Internet fax

settings using your Brother machine. You can also find supported

protocol information and detailed troubleshooting tips.

To find basic information about network and advanced network

features of your Brother machine, see the Network Glossary.

To download the latest manual, please visit the Brother Solutions

Center at (http://solutions.brother.com/)

. You can also download

the latest drivers and utilities for your machine, read FAQs and

troubleshooting tips or learn about special printing solutions from

the Brother Solutions Center.

Version A

ENG

Questions and Answers:

B
Brandon WilliamsAug 8, 2025
Why Brother DCP-7057R All in One Printer cannot print or scan over the network?
- R
  richardblanchardAug 8, 2025
  If your Brother All in One Printer cannot print or scan over the network, there might be an issue with your security software. Please, check your security software settings. Also, verify that the IP addresses and Subnet Masks of both your computer and the Brother machine are correct and on the same network. If you are using Windows, you can use the Network Connection Repair Tool to fix the Brother machine’s network settings by assigning the correct IP address and Subnet Mask. Note that you must log on with Administrator privileges and ensure that the Brother machine is turned on and connected to your computer.
L
lisa60Aug 13, 2025
What to do if Brother All in One Printer is not found on network during MFL-Pro Suite installation?
- A
  Alexandra YoungAug 13, 2025
  If the Brother machine is not found on the network during the MFL-Pro Suite installation, choose to search for the Brother machine again on the installer dialog. Allow access when the alert message of the security software appears during the MFL-Pro Suite installation. Place your Brother machine within about 3.3 feet (1 meter) from the WLAN access point/router when you configure the wireless network settings. Also, move your Brother machine to an obstruction-free area, or closer to the WLAN access point/router and move all the devices away from the Brother machine or WLAN access point/router.

Brother DCP-7057R Specifications

General

Print Technology	Laser
Functionality	Print, Copy, Scan
Print Speed (Black)	20 ppm
Print Resolution	2400 x 600 dpi
Scan Resolution	1200 x 1200 dpi
Paper Capacity	250 sheets
Connectivity	USB 2.0
Scanner Type	Flatbed
Optical Scan Resolution	1200 x 1200 dpi
Maximum Copy Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Copy Speed (Black)	20 ppm