Brother DCP-750CW - Entering Text

For Network Users
46
Entering Text
Press a or b repeatedly to select a character from the list below:
abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
(space)!"#$%&'()l+,-./:;<=>?@[\]^_`{|}˜
Press or repeatedly to move the cursor.
Note
Making corrections
If you entered an incorrect letter and want to change it, press or to position the cursor under the
incorrect letter.
Use the a and b keys to change to the correct letter, then press repeatedly to move the cursor back to
the end of the text.
For example:
WPA/WPA2-PSK enables a Wi-Fi
®
Protected Access Pre-shared key (WPA/WPA2-PSK), which lets the Brother
wireless machine associate with access points using TKIP or AES encryption (WPA-Personal). WPA/WPA2-PSK
(TKIP or AES) uses a Pre-Shared Key (PSK) that is more than 7 and less than 64 characters in length.
See the Network User’s Guide for more details.
64 bit ASCII:
Uses 5 text characters.
e.g.
“Hello” (this is case sensitive)
64 bit
Hexadecimal:
Uses 10 digits of hexadecimal data.
e.g.
“71f2234aba”
128 bit ASCII:
Uses 13 text characters.
e.g.
“Wirelesscomms” (this is case
sensitive)
128 bit
Hexadecimal:
Uses 26 digits of hexadecimal data.
e.g.
“71f2234ab56cd709e5412aa3ba”