Brother DCP-8070D - Improving Copy Quality; Sorting Copies Using the ADF; Adjusting Brightness and Contrast

Making copies
29
4
Improving copy quality 4
You can choose from a range of quality
settings. The default setting is Auto.
 Auto
Auto is the recommended mode for
ordinary printouts. Suitable for documents
that contain both text and photographs.
 Text
Suitable for documents containing only
text.
 Photo
Suitable for copying photographs.
To temporarily change the quality setting,
follow the steps below:
a Load your document.
b Use the dial pad to enter the number of
copies (up to 99).
c Press Options.
Press a or b to choose Quality.
Press OK.
d Press a or b to choose Auto, Text or
Photo.
Press OK.
e Press Start.
To change the default setting, follow the
steps below:
a Press Menu, 2, 1.
b Press a or b to choose the copy quality.
Press OK.
c Press Stop/Exit.
Sorting copies using the ADF4
You can sort multiple copies. Pages will be
stacked in the order 1 2 3, 1 2 3, 1 2 3, and so
on.
a Unfold the ADF output tray and place
your document face down in the ADF
input tray.
b Use the dial pad to enter the number of
copies (up to 99).
c Press Options and a or b to choose
Stack/Sort.
Press OK.
d Press a or b to choose Sort.
Press OK.
e Press Start.
Adjusting Brightness and
Contrast 4
Brightness 4
Adjust the copy brightness to make copies
darker or lighter.
To temporarily change the copy brightness
setting, follow the steps below:
a Load your document.
b Use the dial pad to enter the number of
copies (up to 99).
c Press Options.
Press a or b to choose Brightness.
Press OK.
d Press a to make a lighter copy or press
b to make a darker copy.
Press OK.
e Press Start.