Brother DCP-8070D - Duplex (2-Sided) Copying

Chapter 4
32
Duplex (2-sided) copying 4
If you want to use the duplex copy feature,
load your document in the ADF.
If you get an Out of Memory message
while you are making duplex copies, try
installing extra memory. (See Out of memory
message on page 33.)
Duplex Copy
(long edge flip)
4
 1sidedi2sided L
Portrait
Landscape
a Unfold the ADF output tray and place
your document face down in the ADF
input tray.
b Enter the number of copies (up to 99)
using the dial pad.
c Press Duplex and a or b to choose
1sidedi2sided L.
Press OK.
d Press Start to copy the document.
Advanced Duplex Copy
(short edge flip)
4
 1sidedi2sided S
Portrait
Landscape
a Unfold the ADF output tray and place
your document face down in the ADF
input tray.
b Enter the number of copies (up to 99)
using the dial pad.
c Press Duplex and a or b to choose
1sidedi2sided S.
Press OK.
d Press Start to copy the document.
Note
(L) means Long edge and (S) means
Short edge.
1
2
1
1
2
1
1
2
1
2
1
2
1
1
2
1
1
2
1
2