Making copies
31
4
g Put the next page on the scanner glass.
Press OK.
Repeat steps f and g for each page of
the layout.
h After all the pages have been scanned,
press 2 in step f to finish.
Place the document face down in the
direction shown below:
4
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
Tray selection 4
You can change the Tray Use only for the
next copy.
a Load your document.
b Use the dial pad to enter the number of
copies (up to 99).
c Press Options.
Press a or b to choose Tray Select.
Press OK.
d Press a or b to choose the MP>T1,
T1>MP, #1(XXX) or MP(XXX).
Press OK.
e Press Start.
Note
To change the default setting for Tray
Select, see Tray Use in copy mode
on page 21.
To Next Page
Loading...
