80
CAUTION
HOT SURFACE
After you have just used the machine, some
internal parts of the machine will be
extremely hot. Wait at least 10 minutes for
the machine to cool down before attempting
to clear the paper jam.
IMPORTANT
• To prevent damage to the machine
caused by static electricity, DO NOT touch
the electrodes shown in the illustration.
• We recommend that you place the drum
unit on a clean, flat surface with a sheet of
disposable paper or cloth underneath it in
case you accidentally spill or scatter toner.
c Wipe the laser scanner window (1) by
wiping it with a dry, lint-free soft cloth.
d Put the drum unit and toner cartridge
assembly back in the machine.
e Close the front cover.
f Plug the machine’s power cord back into
the electrical socket first, and reconnect
all cables. Turn on the machine.
1
To Next Page
Loading...
