92
g Put the styrofoam piece marked
“FRONT” into the original carton (1).
Wrap the machine in the plastic bag and
put it in the original carton (2). Put the
drum unit and toner cartridge assembly
in as shown below (3). Put the User's
Guide (If available) and CD-ROM in the
space at the back of the machine (4).
h Take the two styrofoam pieces and
match the front of the machine to the
“FRONT” mark on one of the styrofoam
pieces, and the back of the machine to
the “REAR” mark on the other styrofoam
piece (5). Coil the cables and place
them and the Quick Setup Guide in the
spaces provided as shown below (6).
i Close the carton and tape it shut.
To Next Page
Loading...
