Brother DCP-8080DN - Page 42

Scanning
34
2
e Choose the scanner you are using from the Available Scanners list.
Note
Choose TWAIN:TW-Brother MFC-XXXX (TWAIN:TW-Brother DCP-XXXX),
TWAIN:TW-Brother MFC-XXXX LPT (TWAIN:TW-Brother DCP-XXXX LPT) or
TWAIN:TW-Brother MFC-XXXX LAN (TWAIN:TW-Brother DCP-XXXX LAN).
f Check the Display scanner dialog box on the Scan or Get Photo panel.
g Click Scan.
The Scanner Setup dialog box appears.
h Adjust the following settings, if needed, in the Scanner Setup dialog box:
 Scan (Image Type) (1)
 Resolution (2)
 Scan Type (3)
 Reduce Noise (4)
 Brightness (5)
 Contrast (6)
 Document Size (7)
 Duplex(two-sided) Scanning (8)
(Not available for the DCP-8080DN and MFC-8480DN)

