Brother DCP-J100

Menu and features tables
63
C
Network menu (DCP-J105 only) C
Level1 Level2 Level3 Options Descriptions Page
3.Network 1.TCP/IP 1.BOOT Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best suits
your needs.
See .
2.IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
3.Subnet Mask [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet mask.
4.Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
5.Node Name
BRWXXXXXXXXXXXX Lets you check the Node
name.
6.WINS Config Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address
of the primary or
secondary WINS server.
8.DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address
of the primary or
secondary DNS server.
9.APIPA On*
Off
Automatically allocates
the IP address from the
link-local address range.
2.WLAN Assistant — — You can configure your
wireless network settings
using the Brother
CD-ROM.
3.Setup Wizard — — You can manually
configure your print
server for a wireless
network.
See Software and Network User’s Guide.
The factory settings are shown in Bold with an asterisk.