Brother DCP-J100

Menu and features tables
65
C
0.Initial Setup 1.Date&Time — — Sets the date and time in
your machine.
37
2.LCD Contrast — Light
Dark*
Adjusts the contrast of the
LCD.
See .
3.Sleep Mode — 1Min
2 Mins
3 Mins
5 Mins*
10 Mins
30 Mins
60 Mins
You can choose how long
the machine must be idle
before it goes into Sleep
mode.
4.Reset
1.Machine Reset a Reset b Exit Resets all the machine’s
settings that you have
changed, such as the
Date and Time.
58
2.Network
(DCP-J105)
a Reset b Exit Resets the print server
back to the factory
defaults, such as the
password and IP address
information.
2.All Settings
(DCP-J100)
3.All Settings
(DCP-J105)
a Reset b Exit Resets all the machine’s
settings back to the
factory default.
5.Auto Power Off — Off*
1hour
2hours
4hours
8hours
Set the number of hours
you want the machine to
remain in Sleep Mode
before turning itself off.
When set to Off, the
machine will not power off
automatically.
See .
0.Local Language
(depending on
your country)
— (Choose the
language you
want to use)
Allows you to change the
LCD language.
See .
Level1 Level2 Level3 Options Descriptions Page
See Advanced User’s Guide.
See Quick Setup Guide.
The factory settings are shown in Bold with an asterisk.