8. Power On/Off
Press to turn the machine on.
Press and hold
to turn the machine off. The LCD displays [Shutting Down] and stays on for a few
seconds before turning itself off. A connected external telephone or Telephone Answering Device (TAD) will
always remain available.
If you turn the machine off using , it will still clean the print head periodically to maintain print quality. To
prolong print head life, provide better ink efficiency, and maintain print quality, keep your machine connected
to a power source at all times.
DCP-J1050DW
1. 1.8"(44.9 mm) Liquid Crystal Display (LCD)
Displays messages to help you set up and use the machine.
2. Number of Copies
Press + to increase or - to decrease the number of copies.
3. Warning icon
The warning icon lights up when there is an error or maintenance message.
4. Settings Buttons
Clear/Back
Press to go back to the previous menu.
Settings
Press to access the main menu.
OK
Press to select a setting.
WiFi
Press to configure the wireless settings while the machine is idle.
a or b
Press to scroll through the menus and options.
d or c
• Press to move the cursor left or right on the LCD.
• Press to either confirm or cancel a procedure which is in progress.
11
To Next Page
Loading...
