5. Mode Buttons
INK
Press to access the ink menu while the machine is idle.
SCAN
Press to switch the machine to Scan mode.
WEB
Press to switch the machine to Web mode.
6. Stop/Exit
• Press to stop an operation.
• Press to exit from a menu.
7. Start Buttons
Mono Start
• Press to start making copies in monochrome.
• Press to start scanning documents (in colour or monochrome, depending on the scan setting).
Colour Start
• Press to start making copies in full colour.
• Press to start scanning documents (in colour or monochrome, depending on the scan setting).
8.
Power On/Off
Press to turn the machine on.
Press and hold
to turn the machine off. The LCD displays [Shutting Down] and stays on for a few
seconds before turning itself off.
If you turn the machine off using , it will still clean the print head periodically to maintain print quality. To
prolong print head life, provide better ink efficiency, and maintain print quality, keep your machine connected
to a power source at all times.
DCP-J1140DW
1. Touchscreen Liquid Crystal Display (LCD)
Access menus and options by pressing them on the touchscreen.
12
To Next Page
Loading...
