Brother DCP-J1050DW

Difficulties Suggestions
See Related Information: Telephone Line Interference/VoIP.
Sent faxes are blank. Make sure you are loading the document correctly.
See Related Information: Load Documents in the Automatic Document Feeder
(ADF).
See Related Information: Load Documents on the Scanner Glass.
Vertical black lines when sending. Black vertical lines on faxes you send are typically caused by dirt or correction
fluid on the glass strip. Clean the glass strip.
See Related Information: Clean the Scanner.
Related Information
• If You Are Having Difficulty with Your Machine
• Set Dial Tone Detection
• Telephone Line Interference/VoIP
Related Topics:
• Troubleshooting
• Set Tone or Pulse Dialling Mode
• Choose the Correct Receive Mode
• Set Fax Detect
• Set the Number of Rings Before the Machine Answers (Ring Delay)
• Connect an External TAD
• External TAD (Telephone Answering Device)
• Set the Telephone Line Type
• Print Reports
• Clean the Scanner
• Print a Fax Stored in the Machine's Memory
• Cancel a Fax in Progress
• Check and Cancel a Pending Fax
• Load Documents in the Automatic Document Feeder (ADF)
• Load Documents on the Scanner Glass
366