Brother DCP-J4110DW - Page 10

Chapter 1
2
NOTE
If the Brother screen does not appear
automatically, go to My Computer or
Computer, double-click the CD-ROM
icon, and then double-click start.exe.
b If the model name screen appears, click
your model name.
c If the language screen appears, click
your language. The CD-ROM
Top Menu will appear.
d Click User’s Guides.
e Click PDF documents. If the country
screen appears, choose your country.
After the list of User’s Guides appears,
choose the guide you want to read.
(Macintosh) 1
a Turn on your Macintosh. Insert the
Brother CD-ROM into your CD-ROM
drive. The following window will appear.
b Double-click the User’s Guides icon.
c Choose your language.
d Click User’s Guides. If the country
screen appears, choose your country.
e After the list of User’s Guides appears,
choose the Guide you want to read.
How to find Scanning instructions 1
There are several ways you can scan
documents. You can find the instructions as
follows:
Software User’s Guide
 Scanning
 ControlCenter
 Network Scanning
Nuance™ PaperPort™ 12SE
How-to-Guides
(Windows
®
)
 The complete Nuance™ PaperPort™
12SE How-to-Guides can be viewed from
the Help section in the PaperPort™ 12SE
application.
Presto! PageManager User’s Guide
(Macintosh)
NOTE
Presto! PageManager must be
downloaded and installed before use. For
more information, see Accessing Brother
Support (Macintosh) on page 3.
 The complete Presto! PageManager User’s
Guide can be viewed from the Help section
in the Presto! PageManager application.
How to find Network setup instructions 1
Your machine can be connected to a wireless
or wired network.
 Basic setup instructions
(See Quick Setup Guide.)
 The wireless access point or router
supports Wi-Fi Protected Setup™ or
AOSS™
(See Quick Setup Guide.)
 More information about network setup
(See Network User’s Guide.)