72
Machine feeds multiple pages. Do the following:
(See Loading paper and other print media on page 12.)
Make sure the paper is loaded correctly in the paper tray.
Remove all the paper from the tray and fan the stack of paper well, then put it
back in the tray.
Make sure you do not push the paper in too far.
Make sure the Jam Clear Cover is closed correctly. (See Paper is jammed in the
back of the machine on page 62.)
Make sure the Base Pad in the paper tray is not dirty. (See Advanced User’s
Guide: Cleaning the paper pick-up rollers.)
There is a paper jam. See Printer jam or paper jam on page 61. Make sure the paper guides are set to
the correct paper size.
Paper jam reoccurs. If there is a repeat paper jam, a small piece of paper may be stuck in the machine.
Make sure paper is not still jammed in the machine. (See Additional paper jam
clear operations on page 65.)
The paper jams when you use
2-sided copy or 2-sided print.
Use one of the jam prevention settings, 2-sided1 or 2-sided2.
For copying
(See Advanced User’s Guide: 2-sided copying.)
For printing
(See Software User’s Guide: 2-sided / Booklet (Windows
®
).)
(See Software User’s Guide: 2-sided Printing (Macintosh).)
If paper jams occur often during 2-sided copying or 2-sided printing, the paper
feed rollers may be stained with ink. Clean the paper feed rollers. (See Advanced
User’s Guide: Cleaning the paper feed rollers.)
Copying Difficulties
Difficulty Suggestions
Cannot make a copy. Contact your administrator to check your Secure Function Lock Settings.
Fit to Page does not work correctly. Make sure your source document is not skewed.
Reposition the document and try again.
Paper Handling Difficulties (continued)
Difficulties Suggestions
To Next Page
Loading...
