Brother DCP-J4110DW - How to Change the Machines Scan Mode Settings for PDF Scanning

Chapter 7
44
How to change the machine’s Scan mode settings
for PDF scanning
7
You can change your machine’s Scan mode settings using ControlCenter4. (Windows
®
)
a Open ControlCenter4 by clicking /All Programs/Brother/DCP-XXXX (where XXXX is
your model name)/ControlCenter4. The ControlCenter4 application will open.
b Make sure the machine you want to use is selected from the Model pull-down list.
c Click the Device Settings tab.
d Click Device Scan Settings.