Brother DCP-J4110DW - Touchscreen LCD; Setting the Backlight Brightness

General information
11
1
Touchscreen LCD 1
Setting the backlight
brightness 1
If you are having difficulty reading the
Touchscreen LCD, try changing the
brightness setting.
a Press (Settings).
b Press s or t on the Touchpanel to
display General Setup.
c Press General Setup.
d Press s or t to display
LCD Settings.
e Press LCD Settings.
f Press Backlight.
g Press s or t to display Light, Med or
Dark, and then press the option you
want to set.
h Press .