Brother DCP-J4110DW - 7 How to Scan to a Computer; Before Scanning

40
7
Before scanning 7
To use the machine as a scanner, install a scanner driver. If the machine is on a network,
configure it with a TCP/IP address.
 Install the scanner drivers from the CD-ROM. (See Quick Setup Guide: Install MFL-Pro Suite.)
 Configure the machine with a TCP/IP address if network scanning does not work.
(See Software User’s Guide: Configuring Network Scanning for Windows
®
.)
NOTE
You can download the scanner driver without the Brother ControlCenter from the Brother
Solutions Center at http://solutions.brother.com/
.
How to scan to a computer 7