Brother DCP-J752DW

Chapter 1
10
Basic Operations 1
Press your finger on the Touchscreen LCD to
operate it. To display and access all the
settings and features tables and the available
options, press d c or a b to scroll through
them.
IMPORTANT
DO NOT touch the Touchscreen
immediately after plugging in the power
cord or turning on the machine. Doing this
may cause an error.
The following steps show how to change a
setting in the machine. In this example, the
Paper Type setting is changed from
Plain Paper to Inkjet Paper.
a Press (Settings).
b Press All Settings.
c Press a or b to display
General Setup.
d Press General Setup.
e Press a or b to display Paper Type.
f Press Paper Type.
g Press a or b to display Inkjet Paper.
h Press Inkjet Paper.
NOTE
Press if you want to go back to the
previous level.
i Press .
Changing the keyboard
setting 1
You can choose the type of keyboard for the
Touchscreen.
a Press (Settings).
b Press All Settings.
c Press a or b to display
General Setup.
d Press General Setup.
e Press a or b to display
Keyboard Settings.
f Press Keyboard Settings.
g Press QWERTY or ABC.
h Press .