Brother DCP-J752DW

31
4
4
How to copy 4
The following steps show the basic copy
operation.
a Do one of the following to load your
document:
 (DCP-J752DW)
Place the document face down in the
ADF.
(See Using the ADF (DCP-J752DW)
on page 28.)
 Place the document face down on
the scanner glass.
(See Using the scanner glass
on page 29.)
b Press (Copy).
 The Touchscreen shows:
1 No. of Copies
You can enter the number of copies in
the following ways:
 Press - or + on the Touchscreen (as
shown above).
 Press the number of copies on the
Touchscreen.
Enter the number of copies using the
keyboard on the Touchscreen.
Press OK.
c If you want more than one copy, enter
the number (up to 99).
d Press Mono Start or Colour Start.
Stop copying 4
To stop copying, press .
Making copies 4
1