Home > Fax > Telephone Services and External Devices > External TAD (Telephone Answering
Device) > Connect an External TAD
Connect an External TAD
Related Models: MFC-J491DW/MFC-J497DW/MFC-J890DW/MFC-J895DW
1. Set your external TAD to the minimum number of rings allowed. For more information, contact your telephone
provider. (The machine’s Ring Delay setting does not apply.)
2. Record the outgoing message on your external TAD.
3. Set the TAD to answer calls.
4. Set the Receive Mode on your machine to [External TAD].
Related Information
• External TAD (Telephone Answering Device)
• Receive Modes Overview
• Choose the Correct Receive Mode
• Telephone and Fax Problems
263
To Next Page
Loading...
