Brother DCP-J774DW

Home > Troubleshooting > Reset Your Brother Machine > Reset Functions Overview
Reset Functions Overview
IMPORTANT
(MFC-J491DW/MFC-J497DW)
When you reset the machine, your faxes that are stored in the machine's memory may be deleted. Before
you reset the machine, you can transfer your faxes to your computer or another fax machine so you will not
lose any important messages.
The following reset functions are available:
1. [Machine Reset]
You can reset all the machine’s settings that you have changed, such as Date and Time and Ring Delay.
The Address Book, Fax Reports, and Call History will remain. (MFC models)
2. [Network]
Reset the print server back to its default factory settings (includes Password and IP Address information).
3. [Address Book & Fax] (MFC models)
Address Book & Fax resets the following settings:
• Address Book and Setup Groups
• Programmed fax jobs in the memory (MFC-J890DW/MFC-J895DW)
Delayed Fax and Delayed Batch Transmission
• Station ID
Name and Number
• Remote Fax Options (MFC-J890DW/MFC-J895DW)
• Report
Transmission Verification Report, Address Book and Fax Journal
• History
Caller ID history and Outgoing Call
• Faxes in memory
4. [All Settings]
Use the Settings Reset function to reset all machine's settings to the settings originally set at the factory.
Brother strongly recommends you perform this operation when you dispose of the machine.
(MFC-J890DW/MFC-J895DW)
Unplug the interface cable before you select [Network] or [All Settings].
Related Information
• Reset Your Brother Machine
• Transfer Your Faxes or Fax Journal Report
504