Brother DCP-J774DW

Level 1 Level 2 Level 3 Descriptions
(DCP-J772DW/
DCP-J774DW)
Paper Size
(DCP-J772DW/
DCP-J774DW)
- - Set the size of paper in paper tray #1.
Fax Preview
(MFC-J890DW/
MFC-J895DW)
- - View received faxes on the LCD.
All Settings
- - Configure the detailed settings.
[General Setup]
[Settings] > [All Settings] > [General Setup]
Level 1
Level 2 Level 3 Descriptions
Maintenance Improve Print
Quality
- Check and correct the print quality, alignment and
paper feeding according to the LCD instructions.
Print Head
Cleaning
- Clean the print head according to the LCD
instructions.
Ink Volume
- Check the available ink volume.
Ink Cartridge
Model
- Check your ink cartridge numbers.
Print Setting
Options
Reduce
Smudging
Reduce smudging on the paper or paper jams during
printing.
Slow Drying
Paper
Use this setting when printing with a type of plain
paper on which the ink dries very slowly.
Paper Type
- - Set the type of paper in the paper tray.
Paper Size
- - Set the size of paper in the paper tray.
Check Paper
- - Check the paper type and paper size when you pull
the tray out of the machine.
Quiet Mode
- - Decrease printing noise.
Beep
(DCP models)
- - Adjust the beeper volume.
Volume
(MFC models)
Ring
- Adjust the ring volume.
Beep
- Adjust the beeper volume.
Speaker
- Adjust the speaker volume.
LCD Settings Backlight
- Adjust the brightness of the LCD backlight.
Dim Timer
- Set how long the LCD backlight stays on after the last
finger press.
Screen Settings Scan Screen
- Set the default Scan screen settings.
Keyboard Settings
- - Select the type of keyboard for the LCD.
Sleep Mode
- - Select how long the machine must be idle before it
goes into Sleep Mode.
Auto Power Off
- - Select how long the machine must wait before it
automatically turns itself off after entering Sleep
Mode.
When set to Off, the machine will not power off
automatically.
578