Brother DCP-L2512D User Manual

viii
Confidential
 To use the Machine Safely
Please keep these instructions for later reference and read them before attempting any
maintenance. If you do not follow these safety instructions, there is a possibility of a fire,
electrical shock, burn or suffocation.
WARNING
ELECTRICAL HAZARDS
Failure to follow the warnings in this section may create the risk of an electrical shock. In
addition, you could create an electrical short, which may create the risk of a fire.
There are high-voltage electrodes inside the product. Before
you access the inside of the product, including for routine
maintenance such as cleaning, make sure you have unplugged
the telephone line cord first (MFC models only) and then the
power cord from the AC power outlet, as well as any telephone/
RJ-11 (MFC models only) or Ethernet/RJ-45 cables (Network
models only) from the product. DO NOT push objects of any
kind into this product through slots or openings in the product,
as they may touch dangerous voltage points or short out parts.
DO NOT handle the plug with wet hands. Doing this might cause an
electrical shock.
DO NOT use this product during a thunderstorm. There may be a remote risk of an electrical
shock from lightning.
Always make sure the plug is fully inserted. DO NOT use the product or handle the cord if
the cord has become worn or frayed.
DO NOT allow this product to come into contact with water. This product should not be used
around standing water, including a bath tub, sink, or swimming pool; around appliances
containing water, including a refrigerator; or in a wet basement.
This product should be connected to an AC power source within the range indicated on the
rating label (You can find the rating label on your machine). DO NOT connect it to a DC
power source or inverter. If you are not sure what kind of power source you have, contact a
qualified electrician.
WARNING
When removing the Low-voltage power supply, do not touch it within
3 minutes after disconnecting the AC cord as it may cause an electric
shock due to the electric charge accumulated in the capacitor.

Brother DCP-L2512D Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Duplex Printing	Automatic
Scanner Type	Flatbed
Copy Resolution	Up to 600 x 600 dpi
Interface	USB 2.0
Processor	600 MHz
Memory	64 MB
Print Speed	Up to 30 ppm
Print Resolution	2400 x 600 dpi
Paper Input	250 sheets
Paper Output	100 sheets
Scan Resolution	1200 x 1200 dpi
Copy Speed	Up to 30 cpm