EasyManuals Logo

Brother DCP-L2512D User Manual

Brother DCP-L2512D
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #298 background imageLoading...
Page #298 background image
5-26
Confidential
Change ON/OFF setting for lower case compensation
<Function>
This function is used to expand and compensate the white lower case which is easily
collapsed by the pattern matching.
<Operating Procedure>
(1) Press the [4], and then the [5] in the initial state of maintenance mode. For models
without keypad, press the [] or [] to display “MAINTENANCE 45” on the LCD and
press the [OK]. “USBNo.” is displayed on the LCD.
(2) Press the [] or [] to display “Dot Correct” on the LCD, and press the [SET] or [OK].
“Dot Correct = ON*” is displayed on the LCD.
(3) Press the [] or [] to select “Dot Correct = ON” or “Dot Correct = OFF”, and press the
[SET] or [OK]. “Accepted” is displayed on the LCD, and the machine returns to the initial
state of maintenance mode.
Change ON/OFF setting for fixation strength improvement
<Function>
When the fuser unit does not reach the target temperature and the fixation strength can not
be secured due to an external factor such as the power source environment is poor, this
function provides a mode which can secure the fixation strength by checking the fuser
temperature before feeding.
<Operating Procedure>
(1) Press the [4], and then the [5] in the initial state of maintenance mode. For models
without keypad, press the [] or [] to display “MAINTENANCE 45” on the LCD and
press the [OK]. “USBNo.” is displayed on the LCD.
(2) Press the [] or [] to display “Fix Intensity up” on the LCD, and press the [SET] or
[OK].
“Fix Mode = OFF*” is displayed on the LCD.
(3) Press the [] or [] to select “Fix Mode = ON” or “Fix Mode = OFF”, and press the
[SET] or [OK]. “Accepted” is displayed on the LCD, and the machine returns to the initial
state of maintenance mode.

Table of Contents

Other manuals for Brother DCP-L2512D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother DCP-L2512D and is the answer not in the manual?

Brother DCP-L2512D Specifications

General IconGeneral
Print TechnologyLaser
FunctionsPrint, Copy, Scan
Duplex PrintingAutomatic
Scanner TypeFlatbed
Copy ResolutionUp to 600 x 600 dpi
InterfaceUSB 2.0
Processor600 MHz
Memory64 MB
Print SpeedUp to 30 ppm
Print Resolution2400 x 600 dpi
Paper Input250 sheets
Paper Output100 sheets
Scan Resolution1200 x 1200 dpi
Copy SpeedUp to 30 cpm

Related product manuals