Brother DCP375CW - 6 ] PC-Driven Printing Problems

4-42
Confidential
[ 6 ] PC-driven printing problems
Problem Action to be taken
(14)Characters having shadows
(ghost)
• Adjust the paper feeding correction values of the paper feed roller and
paper ejection roller with Function code 58 in the maintenance mode.
(Refer to Chapter 7, Section 7.2, [ 5 ].)
• Correct the positioning error of the head/carriage unit with Function
code 63 in the maintenance mode. (Refer to Chapter 7, Section 7.2,
[ 4 ].)
• Replace the PF encoder disk.
• Replace the PF encoder PCB.
(15)Stains in the center of, or over
the whole page of, the
recording paper
• Use the specified type of paper. (Do not use short grain paper.)
• Enable the "secure paper feed mode" referring to the USER’S GUIDE.
(16)Dirt on the back of paper • Clean the paper pull-in rollers and paper ejection roller.
• Clean the platen.
Problem Action to be taken
(1) PC-driven printing is
impossible.
• Interface with the host computer
• PC interface cable
• Main PCB
• USB interface
• Network interface
VWXYZ