Brother DCP375CW - Disassembly of Control Panel ASSY; Models with Color LCD

6-29
Confidential
6.1.6 Disassembly of Control Panel ASSY
(The control panel ASSY contains the media module cover.)
*1 For models with microphone
*2 For models with touch panel
Models with color LCD
(1) Place the control panel ASSY upside down.
(2) Release the three/four "x" latches and take the control panel PCB ASSY (consisting of two
PCBs) out of the control panel base.
DCP395CN and MFC495CW/795CW: Three "x" latches
DCPJ125/J315W/J515W/J715W and MFCJ220/J265W/J270W/J410/J410W/J415W/J615W/J630W :
Four "x" latches
NOTE: Models with microphone: Before removing the control panel PCB ASSY, release
the microphone harness
*1
(a part of panel-main harness) from the cable guides on the
control panel base and take the microphone
*1
and its cover
*1
out of the control panel base.
Assembling Note: When mounting the control panel PCB ASSY, first fit it below the four
tabs (see the illustration given below and on the next page) on the control panel base and
then secure it with three/four "x" latches.
(3) Remove the rubber keypads (and keys depending upon the model).
DCP395CN and MFC495CW/795CW
The illustration below shows the control panel ASSY of the
MFC795CW. It differs depending upon the model.
(6_33_MFC_r1)
(Front)
Control panel PCB ASSY
Control panel base
LCD flat cable
Rubber keypa
d
Rubber keypad
Microphone
Microphone cover
Tabs
Tab
Latch "x"
Panel-main harness
Latch "x"
Tab
Touch panel
harness
Latch "x"
Cable guide
*
1
*
1
*
1
*
2
*
2
Grounding wire