Brother DCP375CW - Head Cover

6-63
Confidential
Head cover
(6) Move the head/carriage unit to position "P" (shown below) by hand.
Assembling Note: When accessing the head/carriage unit placed on the engine unit, put
the head/carriage unit in position "P" (on the right edge of the engine chassis).
Note: If the head/carriage unit does not move, rotate the ASF/maintenance drive gear
counterclockwise (viewed from the left) by hand to unlock the head/carriage unit and move
it to position "P."
(7) Unlatch the head cover from the head/carriage unit and pull it up.
ASF motor
Head cover
Lower cover
ASF motor
CR guide rail
ASF/maintenance
drive gear
Lower cover
(6_57)
(Rear)
Position "P"
(Here on the
engine chassis)
Tabs
Head cover
Head/carriage unit
Latch
Latch
Latch
Ink absorber box
Lower cover
(6_58)