Brother DCP375CW - Page 242

6-49
Confidential
* For MFC only
"c": Taptite, cup B M3x10
"d": Screw, pan (s/p washer) M3x8
"e": Taptite, cup S M3x6
Assembling Note: If you replace the main PCB, you need to load programs onto the flash
ROM, restore the machine information that has been backed up in an external memory
(refer to Chapter 9, Section 9.4.11), and make specified adjustments of various settings
(refer to Chapter 7, Section 7.3). Make sure beforehand that the head/carriage unit is
mounted.
Lower cover
Main PCB shield frame
*
SDAA enclosure
(6_47_mini9e2_r1)
Power supply harness
Carriage motor harness
Paper feed motor harness
PF encoder/registration
sensor harness
Ink empty sensor
harness
*
Main-MJ (EXT) harness
*
Main-MJ (LINE) harness
ASF motor harness
Ink cartridge detection
sensor harness
Purge cam switch harness
Cap lift cam switch harness
ASF encoder harness
DCPJ125/J315W/J515W/J140W and MFCJ220/J265W/J270W/J410/J410W/J415W
Main PCB
"e"
"e"
"e"
(Only for DCPJ125/MFCJ220)
"c"
"d"
"c"