Brother DCP375CW - Page 304

Confidential
[ 15 ] Adjust the touch panel (Function code 78)
(For models with touch panel)...........................................................7-35
[ 16 ] Print out a total quality check pattern ................................................7-35
[ 17 ] Switch back to standby .....................................................................7-35
7.4 IF YOU REPLACE THE ADF & DOCUMENT COVER ASSY OR
ADF-RELATED PARTS (FOR MODELS WITH ADF).............................................7-36
[ 1 ] Print out an ADF copy chart and make a copy of that chart
in ADF scanning................................................................................7-36
7.5 IF YOU REPLACE THE INK ABSORBER BOX OR FLUSHING BOX...................7-39
[ 1 ] Reset each of the purge and flushing counters.................................7-39
7.6 IF YOU REPLACE THE CONTROL PANEL ASSY OR CONTROL PANEL PCB..7-40
[ 1 ] Check LCD operation and specify the LCD type
(Function code 12) ............................................................................7-40
[ 2 ] Check the operation of the control panel PCB (Function code 13)...7-40
[ 3 ] Adjust the touch panel (Function code 78)
(For models with touch panel)...........................................................7-40
7.7 IF YOU REPLACE THE LCD UNIT........................................................................7-40
[ 1 ] Check LCD operation and specify the LCD type
(Function code 12) ............................................................................7-40
7.8 IF YOU REPLACE THE FB UNIT* OR SCANNER COVER (SCANNER UNIT) ....7-40
[ 1 ] Load update programs/data..............................................................7-40
[ 2 ] Specify the CIS type (Function code 59)...........................................7-40
[ 3 ] Acquire white level data and set CIS scanner area
(Function code 55) ............................................................................7-40
[ 4 ] Print out an ADF copy chart and make a copy of that chart
in ADF scanning (For models with ADF)...........................................7-40