7-10
Confidential
The Brother Maintenance USB Printer Properties window appears as shown below.
4) Click the Ports tab.
In this example, the port number assigned to the Brother Maintenance USB Printer is
USB001.
(9) In the Head Info. box on the BrUsbSn screen (page 7-8), type the 16-digit property code
(e.g., ALR7765501200000) which is printed on the bar code label attached to the lower
cover. Click the OK button.
(10)To check that the entered head property code is correct (using function code 68 in Chapter
9, Section 9.4.22), press the 6 and 8 keys in this order. Then press the 2, 5, 8, and 0 keys in
this order. For models without numerical keypad, enter 6, 8, 2, 5, 8, and 0 in this order
using the , and OK keys.
The LCD shows the current head property code (16-digit code) stored in the EEPROM on
the main PCB.
(11) Check that the character string entered in step (9) appears.
If it is OK, press the Stop/Exit key.
If something other than that appears, check the connection between the PC and machine
and go back to step (6).
To Next Page
Loading...
