6 - 1
SETUP SEND
6
6
Setup Send
Automatic Document Feeder (ADF)
■ Originals must be between 14.8 and 21.6 cm wide, and 15 and 60 cm long. Your FAX/
MFC can only scan an image 20.8 cm wide, regardless the paper width.
■ Make sure you place the original face down, top edge first.
■ Adjust the paper guides to fit the width of your original.
■ The automatic document feeder (ADF) can hold up to 10 pages, feeding each one
individually through the FAX/MFC. Use standard (64 gsm–90 gsm) paper when using
the ADF; if you’re using heavier paper, feed each sheet individually to prevent paper
jams.
■ Make sure originals written with ink are completely dry.
■ Press Resolution (before you send the fax) to select the resolution for the document
you’re sending. (See Resolution, page 6-6.)
DO NOT use curled, wrinkled, folded or ripped paper, or paper with staples, paper
clips, paste or tape attached. DO NOT use cardboard, newspaper or fabric. DO NOT
use paper on which correction fluid has been used.
To Next Page
Loading...
Need help?
General
