Brother HE-800A - Needle Zigzag Mechanism; Shaft Bush Mechanism

2. DISASSEMBLY
HE-800A
24
2-3-4. Needle zigzag mechanism
1. Remove the screw (1), and then remove the felt support assembly (2) from the motor bracket (3).
2. Remove the screw (4), and then remove the tube support (5).
2-3-5. Shaft bush mechanism
1. Remove the screw (1), and then remove the tube support U (2).
2. Remove the wicks (3) and (4), and then disconnect the oil tube (5).
3. Remove the felt (6), and then remove the wick (7) from the bush F (8).
4. Remove the felt (9), and then remove the wicks (10) and (11) from the bush F (8).
5. Remove the felt (12) from the bush F (8).
4082Q
4083Q
4084Q
4086Q
4085Q