3. ASSEMBLY
HE-800A
58
3-10. Presser lifter mechanism (2)
1. Install the motor lever (2) to the pulse motor N assembly (for needle zigzag) (1) with the two set screws (3) so
that the dimensions are as shown in the illustration.
2. Install the gear (5) to the pulse motor FT assembly (for presser lifter) (4) with the two set screws (6) so that the
dimensions are as shown in the illustration.
3. Install the pulse motor N assembly (for needle zigzag) (1) and the pulse motor FT assembly (for presser lifter)
(4) to the motor bracket (9) with the four bolts (7) and the three bolts (8) so that the directions of the cords are
as shown in the illustration. (Motor bracket assembly (10))
4216Q 4217Q
To Next Page
Loading...
