To Next Page
E
Emily HodgesSep 12, 2025
What does DRUM STOP mean on my Brother Laser printer?
- DDerrick MartinSep 12, 2025
If your Brother Laser printer displays 'DRUM STOP', replace the drum unit with a new one.
What does DRUM STOP mean on my Brother Laser printer?
If your Brother Laser printer displays 'DRUM STOP', replace the drum unit with a new one.
How do I resolve 'Print Overrun' on my Brother Laser printer?
To resolve the 'PRINT OVERRUN' error on your Brother Laser printer, press Go to print the remaining data in the machine's memory. Alternatively, cancel the print job to delete the remaining data. If the error persists, reduce the complexity of your document or lower the print resolution.
How to delete the "Replace Toner" message on a Brother HL-2240 Printer after replacing the toner?
If you're still seeing the "Replace Toner" message on your Brother printer after replacing the toner, consider the following: * The new toner actuator might be catching; correct its position. * Check and reconnect the harness of the Panel PCB if there's a connection failure. * The Panel PCB assembly or Main PCB assembly might need replacement.
What does 'Cartridge Error' mean on my Brother Laser printer?
If your Brother Laser printer shows a 'CARTRIDGE ERROR', make sure the drum unit and toner cartridge assembly is installed properly.
What does 'Drum End Soon' mean on my Brother Laser printer?
The 'DRUM END SOON' message on your Brother Laser printer indicates that the drum unit will need to be replaced soon. It is recommended to buy a new drum unit to have it ready for replacement.
Why won't my Brother Laser printer feed paper?
If your Brother Laser printer is not feeding paper, ensure the paper in the tray is straight and not curled. If curled, straighten it before printing. Try removing the paper, turning the stack over, and placing it back in the tray. If the issue persists, replace the paper, reduce the amount of paper in the tray, ensure that manual feed mode is not selected in the printer driver, and clean the paper pick-up roller.
What does 'Jam Tray 1 Jam Inside Jam Rear Jam Duplex 1' mean on Brother Laser printer?
The error message 'Jam Tray 1 Jam Inside Jam Rear Jam Duplex 1' on your Brother Laser printer indicates that there is jammed paper in one of those areas. Clear the jammed paper from the indicated area.
What does FUSER ERROR mean on my Brother Laser printer?
If the 'FUSER ERROR' message appears on your computer for your Brother Laser printer, turn the machine's power off, wait a few seconds, and then turn it on again. Leave the machine for 15 minutes with the power on.
Why does the paper slide off the output tray of my Brother Laser printer?
If the paper slides off the top output tray of your Brother Laser printer, lift up the output tray support flap 1. If the paper curls and slides off, lift up the output tray support flap 2.
How to resolve DUPLEX DISABLED 1 error on Brother Laser printer?
To resolve the 'DUPLEX DISABLED 1' error on your Brother Laser printer, close the back cover of the printer and put the duplex tray back in.
General| Color | No |
|---|---|
| Maximum resolution | 2400 x 600 DPI |
| Economical printing | Yes |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Maximum internal memory | - MB |
| Sound power level (standby) | 31 dB |
| Sound pressure level (printing) | 53 dB |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Total number of input trays | 1 |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 356 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Multi-purpose tray media types | Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Transparencies |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 65 W |
| Power consumption (printing) | 495 W |
| Power consumption (PowerSave) | 0.9 W |
| Maximum duty cycle | - pages per month |
| Page description languages | GDI |
| Sustainability certificates | ENERGY STAR |
| Package weight | 8000 g |
| Standard interfaces | USB 2.0 |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion |
| Windows operating systems supported | Windows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
| Product color | Black |
Weight and Dimensions| Dimensions (WxDxH) | 368 x 360 x 183 mm |
|---|
