To Next Page
A
Ashlee ParkerAug 25, 2025
What to do if my Brother HL-2240 Printer says 'No Toner'?
- AApril ChristensenAug 25, 2025
If your Brother printer is displaying a 'NO TONER' message, open the front cover and install the toner cartridge.
What to do if my Brother HL-2240 Printer says 'No Toner'?
If your Brother printer is displaying a 'NO TONER' message, open the front cover and install the toner cartridge.
How to fix 'Memory Full' error on Brother Printer?
If your Brother printer displays a 'MEMORY FULL' error, you can press the Go button to print the data remaining in the printer's memory. Alternatively, cancel the print job to delete the remaining data. Another approach is to reduce the complexity of your document or lower the print resolution.
Why does my Brother Laser printer say 'Manual Feed'?
The 'MANUAL FEED' message on your Brother Laser printer indicates that the manual feed slot is in use. If the slot is empty, place a piece of paper in it. Also, ensure you are using paper that meets Brother’s recommended specifications and that you have loaded the same size paper selected in the current driver setting.
Why does my Brother HL-2240 Printer say 'No Paper T1'?
If your Brother printer displays a 'No Paper T1' error, it could be due to several reasons. The paper tray might be empty or not correctly installed; if it’s empty, add a new stack of paper and press Go. Even if there is paper, ensure it is straight and not curled—straighten if necessary. Try removing the paper, turning the stack over, and placing it back in the tray. Reduce the amount of paper in the tray. Also, verify that the paper meets Brother’s recommended specifications and that you've loaded the same size paper selected in the driver settings. If the problem persists, the paper pick-up roller may be dirty and needs cleaning.
Why does my Brother All in One Printer say 'No Toner'?
If your Brother All in One Printer displays 'No Toner', it means the toner cartridge is not installed correctly. Pull out the drum unit, remove the toner cartridge, and then re-install it into the drum unit.
What does 'Replace Drum' mean on my Brother All in One Printer and how to solve it?
The 'Replace Drum' message on your Brother All in One Printer indicates that it is time to replace the drum unit. Replace the drum unit to resolve this issue.
How to fix 'Drum Error' on Brother All in One Printer?
If your Brother All in One Printer displays 'Drum Error', it indicates that the corona wire on the drum unit needs to be cleaned. Clean the corona wire on the drum unit to resolve this issue.
What does 'Replace Toner' mean on my Brother All in One Printer and how to fix it?
The 'Replace Toner' message on your Brother All in One Printer means the machine will stop printing until you replace the toner cartridge. If the Toner setting is set to Stop, replace the toner cartridge with a new, original Brother toner cartridge to reset the Replace Toner mode. If the Toner setting is set to Continue, the machine will continue printing until the LCD shows Toner Ended.
How to resolve 'Toner Low' message on Brother All in One Printer?
If your Brother All in One Printer displays 'Toner Low', it means the toner is running low. It is recommended to purchase a new toner cartridge before you receive a 'Replace Toner' message.
How to fix 'No Paper' error on my Brother All in One Printer?
If your Brother All in One Printer shows a 'No Paper' error, it means the printer is out of paper or the paper is not loaded correctly. Refill the paper tray and press Start. Alternatively, remove the paper and load it again, then press Start. If the problem persists, the paper pick-up roller may need cleaning.
General| Color | No |
|---|---|
| Maximum resolution | 2400 x 600 DPI |
| Economical printing | Yes |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Maximum internal memory | - MB |
| Sound power level (standby) | 31 dB |
| Sound pressure level (printing) | 53 dB |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Total number of input trays | 1 |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 356 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Multi-purpose tray media types | Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Transparencies |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 65 W |
| Power consumption (printing) | 495 W |
| Power consumption (PowerSave) | 0.9 W |
| Maximum duty cycle | - pages per month |
| Page description languages | GDI |
| Sustainability certificates | ENERGY STAR |
| Package weight | 8000 g |
| Standard interfaces | USB 2.0 |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion |
| Windows operating systems supported | Windows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
| Product color | Black |
Weight and Dimensions| Dimensions (WxDxH) | 368 x 360 x 183 mm |
|---|
