Brother HL-4050CDN - Using the BR-Script3 Printer Driver; (Post Script 3 Language Emulation for Macintosh ) (HL-4050 CDN Only); Installing the BR-Script3 Printer Driver

Driver and Software
61
3
Using the BR-Script3 printer driver
(Post Script
®
3™ language emulation for Macintosh
®
)
(HL-4050CDN only)
3
Note
• To use the BR-Script3 printer driver on a Network, see the Network User’s Guide on the CD-ROM.
• To use the BR-Script3 printer driver, you need to set the Emulation to BR-Script3 by using the control
panel before connecting the interface cable. (See Menu table on page 77.)
Installing the BR-Script3 printer driver 3
You need to install the BR-Script3 printer driver using the following instructions.
Note
If you use a USB cable, only one printer driver per printer can be registered in the Printer Setup Utility (Print
Center for Mac OS® X 10.2 users). Before installing the BR-Script3 printer driver, delete from the Printer
list any other Brother drivers that are for the same printer.
a From the Go menu Choose Applications.
b Open the Utilities folder.