Control Panel
87
4
Calibration 4
The output density for each color may vary depending on the environment the machine is in such as
temperature and humidity. Calibration helps you to improve the color density.
a Press the + or - key to choose Color Correction. Press OK.
Select ab or OK
Machine Info.
h
Select ab or OK
Color Correction
b Press OK.
Color Correction
ColorCalibration
c Press OK.
ColorCalibration
Calibrate
d Press OK again.
Calibrate
OK?
You can reset the calibration parameters back to those set at the factory.
a Press the + or - key to choose Color Correction. Press OK.
Select ab or OK
Machine Info.
h
Select ab or OK
Color Correction
b Press OK.
Color Correction
ColorCalibration
c Press the + or - key to choose Reset. Press OK.
ColorCalibration
Reset
d Press OK again.
Reset
OK?
To Next Page
Loading...
