Control Panel
76
3
1
### means a number within the range of 000 to 255. On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt
to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA
IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you will need to manually
enter an IP address from the machine's control panel.
WLAN Status
(Appears only
when WLAN
Enable is On.)
Status Shows wireless Ethernet link
status.
Signal Shows the signal condition
when Status is Active.
Channel Shows the channel in use
when Status is Active.
Speed Shows the connecting speed
when Status is Active.
SSID Shows SSID [uses a maximum
of 32 digits and characters 0-9,
a-z and A-Z in ASCII values]
Comm. Mode
Ad-hoc
*
/
Infrastructure
Shows the current
Communication Mode.
MAC Address Shows MAC address of the
machine.
Set to Default Restores wireless network settings of the internal print server to the factory default.
WLAN Enable Off*/On Turns the wireless interface on
or off.
Network R
eset
Restores all network settings of the internal print server to the factory default.
Reset Menu
Display Shows Description
Network Restores all network settings of the internal print server to the factory default.
Reset Printer Resets the machine and restores all printer settings (including command settings) to
settings you have previously made with the control panel buttons.
Factory Reset Resets the machine and restores the printer settings (including command settings) to the
factory default settings.
The factory settings are shown in Bold with an asterisk.
Network for HL-4570CDW users (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.
To Next Page
Loading...
