Brother HL-5130 - Page 146

HL-5130/5140/5150D/5150DN Service Manual
4-45
3.18 Base Plate / LV Insulation Sheet
(1) Remove the eight bind B M4x12 Taptite screws.
(2) Remove the four cup S M3x6 Taptite screws.
(3) Remove the pan (washer) M3.5x6 Taptite screw, and then remove the ground wire.
(4) Remove the base plate.
Fig. 4-79
(5) Remove the two bind B M4x12 Taptite screws, and then remove the LV insulation sheet
1/2/3.
Fig. 4-80
Taptite, cup S M3x6
Taptite, bind B M4x12
Taptite, bind B M4x12
Taptite, bind B M4x12
Taptite, cup S M3x6
Base plate
Screw, pan
(washer) M3.5x6
Ground wire
LV insulation sheet 2
Taptite, bind B M4x12
LV insulation sheet 1
LV insulation sheet 3