Brother HL-5130 - DX-Sensor Pcb Assy (Hl-5150 D;5170 Dn)

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-46
3.19 DX-Sensor PCB ASSY (HL-5150D/5170DN)
(1) Disconnect the connector.
(2) Remove the bind B M3x10 Taptite screws, and then remove the DX-sensor PCB ASSY.
Fig. 4-81
Taptite, bind B M3x10
DX-sensor PCB ASSY
Engine PCB ASSY