CHAPTER 2 INSTALLATION AND BASIC OPERATION
2-10
3. For Network shared printer users
(1) Select Network Shared Printer, and then click the Next button.
(2) Select the current printer’s queue, and then click the OK button.
Fig. 2-8
(3) Click the Finish button.
(4) The setup is now complete.
4. For Brother Peer-to-Peer network printer users (LPR-recommended Peer-to-
Peer printing method)
Configuring the LPR port
(1) Select Search from a list of available printers or enter your printer’s IP address. Click
the Next button.
Fig. 2-9
NOTE: Contact your Administrator about the Printer’s IP Address.
To Next Page
Loading...
