Brother HL-T4000DW - Configure Active Directory Authentication Using Web Based Management

Home > Security > Use Active Directory Authentication > Configure Active Directory Authentication Using
Web Based Management
Configure Active Directory Authentication Using Web Based
Management
Active Directory authentication supports Kerberos authentication and NTLMv2 authentication. You must
configure the SNTP protocol (network time server) and DNS server configuration for authentication.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If the machine prompts you for a password, type it, and then click
.
4. Click the Administrator tab.
5. Click the User Restriction Function menu in the left navigation bar.
6. Select Active Directory Authentication.
7. Click Submit.
8. Select the Active Directory Authentication menu in the left navigation bar.
9. Configure the following settings:
Option Description
Remember User ID Select this option to save your User ID.
Active Directory Server
Address
Type the IP address or the server name (for example: ad.example.com)
of the Active Directory Server.
Active Directory Domain Name Type the Active Directory domain name.
Protocol & Authentication
Method
Select the protocol and authentication method.
LDAP Server Port Type the port number to connect the Active Directory server via LDAP
(available only for LDAP + kerberos authentication method).
10. Click Submit.
Related Information
• Use Active Directory Authentication
146