Home > Paper Handling > Load Paper > Paper Settings > Set a Default Tray Based on Your Task
Set a Default Tray Based on Your Task
Change the default tray the machine uses for each mode.
[Auto Tray Select] sets your machine to feed paper from the most appropriate tray for the paper type and
size you have set.
The machine feeds paper from the most appropriate tray using the tray priority order you have set.
Some trays are not available depending on your model.
1. Press [Settings] > [All Settings] > [General Setup] > [Tray Setting].
• For printing photos, press [Tray Setting: JPEG Print (Media)] > [Tray Use].
2. Press the tray option you want.
3. Press .
Related Information
• Paper Settings
45
To Next Page
Loading...
