Brother KIT CW - Included Accessories; Kit Components and Materials

GETTING STARTED
5
ENGLISH
Included Accessories
Part Name Part Code
Description
1. CD-ROM1 (for multi-needle embroidery
machines)
XF1985-001
• Certification Key Issuing Wizard
• Embroidery patterns (30 cutwork patterns)
2. CD-ROM2 (for PE-DESIGN) XF2020-001
• Upgrade application to PE-DESIGN NEXT + CW
To create original cutwork patterns in PE-DESIGN NEXT, install this upgrade application. This
upgrade application is intended for owners of PE-DESIGN versions 5 through 8 or PE-DESIGN
NEXT.
For details on the upgrade procedure, refer to “INSTALLING PE-DESIGN NEXT + CW ON THE
COMPUTER” on page 18.
Users who do not have PE-DESIGN version 5 through 8 or PE-DESIGN NEXT should purchase PE-
DESIGN NEXT. Contact your nearest authorized dealer for details.
3. DVD-ROM (video tutorials) XF2036-001
A DVD-ROM drive and playback software are required for viewing the tutorial DVD on a
computer.
4. Installation Guide XF1979-001
This manual
5. Pattern List XF1981-001
This provides an introduction to the cutwork patterns on the enclosed CD-ROM1 (for machines).
6. Cutwork needle set XF2024-001
Install all four cutwork needles in the machine for fabric cutting.
7. Cutwork needle-changing tools (2) XF2019-001
Use the included tool to hold the cutwork needle when replacing the embroidery needles.
8. Needle plate spacer XF1978-001
Install the needle plate spacer to prevent cut fabric from getting caught under the machine's
needle plate.
9.
Water-soluble stabilizer 75 cm × 30 cm (29-1/
2 inches x 11-3/4 inches) (Non-woven type)
SA540 (Americas excluding Canada)*
SA540C (Canada)*
BM6: XF2027-001 (Other area)*
Use a water-soluble stabilizer when stitching the cut edges of a design or when embroidering
using the net fill stitch. A sheet of non-woven water-soluble stabilizer is supplied. Optional film-
type water-soluble stabilizers (SA520(Americas), BM5: XE0615-001 (Other area)) are available for
use.
* A roll of non-woven water-soluble stabilizer is optionally available.
Note
• Please refer to page 4 for Instruction Manual download information.