Brother MFC-1815 - Page 22

Chapter 1
14
1.Setup
Receive
(In FAX mode
only)
(Continued)
3.Fax Detect Receives fax
messages without
pressing Start. When
Fax Detect is On, you
can receive fax
messages without
pressing Start.
On* The machine can
receive a fax
automatically, even if
you answer the call.
38
Semi (MFC-1815) The machine will only
receive a fax call
automatically if you
answered it using the
machine's handset.
Off If you are at the
machine and answer
a fax call first by lifting
the handset of an
external telephone
(MFC-1810 and
MFC-1811 only) or
the machine
(MFC-1815 only),
press Start.
4.Auto
Reduction
The machine
calculates the
reduction ratio by
using the page size of
the fax and your
Paper Size setting
(Menu, 1, 2, 2).
On* If you choose On, the
machine
automatically
reduces each page of
an incoming fax to fit
on one page of A4,
Letter, Legal or Folio
size paper.
Off
5.Memory
Receive
Automatically stores
any incoming faxes in
its memory if it runs
out of paper.
The machine will
carry on receiving the
current fax, with the
remaining pages
being stored in
memory, if enough
memory is available.
On* Further incoming
faxes will also be
stored into memory
until the memory is
full. When the
memory is full the
machine will stop
automatically
answering calls. To
print the faxes, put
fresh paper in the tray
and press Start.
2.Fax (continued)
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
The factory settings are shown in Bold with an asterisk.